Removing debris from tall structures and high-rise buildings safely, efficiently and cost-effectively is rather challenging. While metal dumpsters might be ideal for disposing of ground level debris on construction sites, they’re way overweight, cumbersome and bulky to be hoisted on rooftops or to clear debris located several stories above ground.
Using chutes to slide debris into a dumpster isn’t the best solution either for all reasons. First, maintaining chutes in good working order is labor intensive and requires frequent repairs because of the friction, tearing, and damage that sharp objects and abrasive materials commonly within industrial debris could cause to the chute fabric as they slide down. In addition, dumping debris down a chute from an elevation generates lots of airborne particles, dust and pollution that might present an important health hazard to workers and the overall public.
Fortunately, you will find new special debris removal dumpster bags in the marketplace which can be perfectly suited to this task and are ideal for the roofing and construction industry. These lightweight dumpster bags weigh under 10 lbs and measure roughly 36″ in width, length and height respectively odvoz odpadu. They’re frame-less, self-standing and unlike other flexible dumpsters and traditional metal containers available in the marketplace, they’re so light and compact, that they’ll easily be deployed by one individual within five full minutes on any rooftop, even on the tallest high rise buildings.
Despite their compact size, these reusable FIBCs (Flexible Intermediate Bulk Containers) can haul amazing quantities of debris from roof tops over and once again without falling apart. With a loading capacity of 2,200 lbs and a volume capacity of 27 cubic feet, they could hold virtually any kind of abrasive or sharp material generated on a building site, including jumbo sized debris such as for example broken glass, torn metal, splintered wood, sheet-rock, cement chunks and much more. Since they are created from woven polypropylene, these dumpster bags are rip resistant and won’t burst open even when the bags are punctured while being lowered to the ground by crane or while suspended in mid air. The straps that support these specialized FIBC bags are even tougher. They are made to withstand 6,000 lbs of pressure and are made from exactly the same form of nylon material utilized by car manufacturers for seat belts.
In addition, these special FIBC bags are built with a secure and user friendly dump bottom mechanism. This provides them an important edge when it comes to discharge rate. Once a case is filled up with debris and lowered to ground level, its contents can be quickly emptied into a traditional dumpster or perhaps a truck simply by releasing a couple of straps. This forces the bottom of the bag to spread wide open and the contents to spill out as the crane lifts the bag back around the rooftop for another load.
These bags are fully customizable. Upon request the maker can modify them to match a customer’s specific needs. Including altering how big bags as well as the number of straps for added support. Needless to say, the bags aren’t just helpful for removing debris from rooftops. They’re also perfectly suited to removing debris at ground level, on steep inclines as well as below ground.
The maker of the specialized debris removal bags happens to be offering a free sample bag with the purchase of three or even more bags, so if you’re starting a fresh construction, remodeling or renovation project and you need a cost-effective alternative to traditional metal dumpsters take full advantage of their free sample and compare how quickly and efficiently you are able to clear debris from a niche site with these new and improved flexible dumpster bags.